[xfbb] Config for a Telnet session to the FBB service

[Ray Wells]

Bob,

Essentially all you need is the entry in port.sys, but you also have to 
enable the M flag in EU <callsign> and set a password with the W flag, 
for each user to whom you'll give telnet access. Looking at your file 
below it looks like you're using the standard port for fbb of 6300 so, 
once port.sys is sorted and the flags set, telnet <host> 6300 should 
return the logon prompt.

If you going to use kernel ax25 for your TNC's you might want to change 
port sys as per my example.

See how you go.

Ray vk2tv

#Ports TNCs
 2      10
#
# Interface 9 = Linux
#
#Com Interface Adress (Hex) Baud
 2   9          0        9600
 1   9          189c        0

#TNC NbCh Com MultCh Pacln Maxfr NbFwd MxBloc M/P-Fwd Mode  Freq
 0   0    0   0      0     0     0     0      00/01   ----  File-fwd.
 1   5    2   local  250   5     5     10     10/15   XUWYL local
 2   4    2   40m     64   1     3     5      20/35   XUWYL 40m
 3   4    2   70cm   250   3     3     10     15/20   XUWYL 70cm
 4   5    2   9k6    250   5     3     10     00/10   XUWYL 9k6
 5   3    2   7550   250   3     2     10     20/30   XUWYL mail
# 6   4      2   30m     64   1     3     5      10/15   XUWYL 30m
 6   4    2   20m     64   1     3     5      35/10   XUWYL 20m
 7   5    2   axip   250   4     5     10     25/10   XUWYL axip
 8   3      2   node   250   5     2     10     00/20   XUWYL node
 9   5    1      0   250   3     5     10     05/15   TUWY  Telnet
 10  5    2   rose0  250   3     5     10     15/10   XUWYL Rose0
# 12  5    2   netbbs 235   3     2     5      45/10   XUWYL Netrom
Bob Scanferla wrote:

>Hello again everyone
>
>What needs to be done to get Telnet to the Application working?
>
>I have made some modes to the port.sys file.
>
>Do I need to do any kind of attach lik I would to get the app talking to a KISS TNC?
>
>Also if I want to add a second TNC on COM2 does this cause a problem for the Telnet port? I have commented out the entries in the port.sys file associated with a second TNC....one challenge at a time :)
>
>Thanks
>Bob
>
>
>My modified port.sys file.....
>
># FBB7.03
>#
>#Ports TNCs
> 2    2
>#
>#Com Interface Adress (Hex) Baud
> 1   9         /dev/cua0    1200
># 2   9         /dev/cua1    1200
> 2   9         189C         0
>#
>#TNC NbCh Com MultCh Pacln Maxfr NbFwd MxBloc M/P-Fwd Mode  Freq
># 0   0    0   0      0     0     0     0      00/01   ----  File-fwd.
> 1   4    1   ax0     128   7     0    10     00/15  XUWYL  145.610
># 2   4    1   ax1     128   7     0    10     00/15  XUWYL  145.030
> 2   8    2    0      250   2     1    10      00/60 TUWR   Telnet
>#
># E
>
>
>
>      Looking for a X-Mas gift?  Everybody needs a Flickr Pro Account.
>
> 
>
>http://www.flickr.com/gift/
>
>_______________________________________________
>xfbb maillist  -  xfbb at f6fbb.org
>http://mailman.f6fbb.org/mailman/listinfo/xfbb
>
>  
>