[xfbb] xfbb7.01j
erik@urbakken.dk
erik@urbakken.dk
Tue, 21 Mar 2017 05:39:39 +0100
Hi.
Now I have setup the xfbb7.01j with my PTC-II. It gets initialized,
and its scans ok.
If I do make a connect to th MBO, and do an fr k1uol, and fr
oz3bof, it seems like the forward take place, but it does not.
Neither on HF or UHF.
I send with this my inittnc1.sys and my port.sys files, and will be
glad if somebody would comment them, and tell me what can be
wrong, if the fault is to be found in one of the 2 files.
Tnx in advance.
73, Erik - OZ4KK sysop OZ4SCA -HF-, and OZ3BOE -U/VHF-.
Here my inittnc1.sys file:
*****************************
#
# INITTNC1.SYS for the SCS PTC-II TNCs
#
# [Port 1: HF]
!BC 0
!BR 3
!PD 0
!ARX 1
!BOX 0
!BELL 0
!CHOB 0
!CMSG 0
!CWID 4
!CWSPEED 100
!FSKA 65
!AP 0
!PSKA 400
!CSDELAY 4
!TXDELAY 3
!MAXERR 70
!MAXSUM 60
!MODE 0
!MYPACTOR OZ4SCA
!MYCALL OZ3BOE
!MYSELC OSCA
!STATUS 1
!LISTEN 0
!TRX TYPE KENWOOD 4800 A
#!TRX OFFSET -1.400
!TO 2
!MARK 2000
!SPACE 2200
!TRX DWELL 30
!TRX WAIT 15
!TRX CH 1 3580 A0
!TRX CH 2 3583
!TRX CH 3 3585
!TRX CH 4 3590
!TRX CH 5 3594
!TRX CH 6 7040
!TRX CH 7 7042
!TRX CH 8 7043
!TRX CH 9 10144
!TRX CH 10 10148
!TRX CH 11 14070
!TRX CH 12 14070.50 A1
!TRX CH 13 14071.55
!TRX CH 14 14073
!TRX CH 15 14074
!TRX CH 16 14075
!TRX CH 17 14076
!TRX CH 18 14120
!TRX CH 19 21075
!TRX CH 20 21077.5
!TRX CH 21 28075,10
!TRX XS 1 1
!TRX XS 2 1
!TRX XS 3 1
!TRX XS 4 1
!TRX XS 5 1
!TRX XS 6 1
!TRX XS 7 1
!TRX XS 8 1
!TRX XS 9 1
!TRX XS 10 1
!TRX XS 11 1
!TRX XS 12 1
!TRX XS 13 1
!TRX XS 14 1
!TRX XS 15 1
!TRX XS 16 1
!TRX XS 17 1
!TRX XS 18 1
!TRX XS 19 1
!TRX XS 20 1
!TRX XS 21 1
!TRX SCAN 1
#
# [Packet hostmode initialisation]
C MAIL
U 0
O 2
N 10
R 1
Y 11
M IUSC
#
# [Port 1: VHF]
I 1:OZ3BOE
T 1:400
P 1:128
W 1:1000
F 1:6000
# [Port 2: VHF]
I 2:OZ3BOE
T 1:400
P 1:128
W 1:1000
F 1:6000
My port.sys
*************
# FBB7.00
#
#
#Ports TNCs
1 2
#
# Interface 9 = LINUX
#
#Com Interface Adress (Hex) Baud
1 9 /dev/ttyS0 57600
#
# MultCh : Name of the Linux port taken from
/etc/ax25/axports
# Maxframe: The maximum nb of frames the TNC
will send at a time.
# NbFwd : Number of channels for OUTGOING
forward at same time.
# MxBloc : Size of forward-block in kb.
#
# M/P-Fwd : Minute of the hour for start of
forward, and period
# (how many minutes between each
forward-start).
# Mode : One of these:
# B : BBS-mode.
# G : "Guest"-mode.
# U : Normal-mode.
# Type host-mode, one of these:
# D : WA8DED
# K : KAM hostmode.
# M : Telephone-modem.
# P : PK-232
# Q : BPQ v 4.x
# X : LINUX kernel interface
# Addition: One of these letters can be used too:
# L : Send unproto beacon after each
arriving mail.
# Y : Yapp allowed on this QRG.
# W : Gateway allowed TO this QRG.# FBB7.00
#
#
#Ports TNCs
1 2
#
# Interface 9 = LINUX
#
#Com Interface Adress (Hex) Baud
1 9 /dev/ttyS0 57600
#
# MultCh : Name of the Linux port taken from /etc/ax25/axports
# Maxframe: The maximum nb of frames the TNC will send at a time.
# NbFwd : Number of channels for OUTGOING forward at same time.
# MxBloc : Size of forward-block in kb.
#
# M/P-Fwd : Minute of the hour for start of forward, and period
# (how many minutes between each forward-start).
# Mode : One of these:
# B : BBS-mode.
# G : "Guest"-mode.
# U : Normal-mode.
# Type host-mode, one of these:
# D : WA8DED
# K : KAM hostmode.
# M : Telephone-modem.
# P : PK-232
# Q : BPQ v 4.x
# X : LINUX kernel interface
# Addition: One of these letters can be used too:
# L : Send unproto beacon after each arriving mail.
# Y : Yapp allowed on this QRG.
# W : Gateway allowed TO this QRG.
# R : Read-Only acces.
# Freq. : Text to describe this port (max 9 characters, no space)
# Same number of lines as number of TNCs.
#
#TNC NbCh Com MultCh Pacln Maxfr NbFwd MxBloc M/P-Fwd Mode Freq
0 0 0 0 0 0 0 0 00/01 ---- File-fwd.
1 1 1 0 250 2 1 10 10/60 HU PACTOR
2 8 1 1 250 3 1 10 30/60 HUWYL Linux
#
# End of file.
#
Best regards.
Erik Jakobsen, erik@urbakken.dk